Share:


ALFA Laval

Creating the best heat transfer, separation and fluid handling technologies in the world for more than 125 years, Alfa Laval's products and solutions are used in such areas as food and water supply, energy, environmental protection and pharmaceuticals.

Centrifugal Pumps
  • LKH

Applications

LKH Pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. LKH is available in thirteen sizes, LKH-5, -10, -15, -20, -25, -35, -40, -45, -50, -60, -70, -80 and -90.
 

Standard design

The LKH pump consists of a standard motor, stub shaft, mechanical compression coupling (LKH-5 with pin bolts), adaptor, back plate, impeller, pump casing and shaft seal. (LKH-5 has clamp connection between pump casing and back plate). The LKH pump is designed for CIP with emphasis on large internal roundings and cleanable seals. The sanitary version of LKH has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs.
 

Shaft seals

The LKH pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal. The pump may also be equipped with a double mechanical shaft seal.
 

Materials

Product wetted steel parts: Acid-resistant steel 1.4404 (316L).

Other steel parts: Stainless steel 1.4301 (304).

Finish: Semi bright.

Product wetted seals: EPDM rubber.

Model Max Flow (m3/hr) Max Head (mtrs) Max Inlet Pressure (bar)
LKH-5 20 20 6
LKH-10 41 16 10
LKH-15 120 20 10
LKH-20 67 38 10
LKH-25 100 55 10
LKH-35 41 56 10
LKH-40 91 78 10
LKH-45 158 40 10
LKH-50 141 54 10
LKH-60 237 58 10
LKH-70 275 110 10
LKH-80 28 83 10
LKH-90 500 39 5

  • LKH Ultra Pure

Application

The LKH UltraPure pump is a highly efficient and economical centrifugal pump, which meets the requirements of the pharmaceutical industries. It provides gentle product treatment and is chemically resistant. LKH UltraPure is available in five sizes, LKH UltraPure-10, -20, -25, -35, and -40.

 

Standard design

The LKH UltraPure pump consists of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, shaft seal and 45° turned pump casing with standard vertical casing drain. As standard the LKH UltraPure is delivered with a 45° outlet (counterclockwise). The LKH UltraPure pump is designed for CIP and SIP with emphasis on large internal roundings and cleanable seals.

 

Shaft seals

The LKH UltraPure pump is equipped with either an external single or a double mechanical shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface and rotating seal rings in silicon carbide.

 

Materials

Productwetted steel parts: Acid-resistant steel 1.4404 (316L) with material traceability 3.1 acc. To EN 10204

Other steel parts: Stainless steel 1.4301 (304).

Productwetted seals: EDPM- USP Class 6.

Finish, productwetted surface: Bright (Ra 0.5 μm)

Finish, pump casing, external surface: Bright (Ra 0.8 μm)


 

Model Max Flow (m3/hr) Max Head (mtrs) Max Inlet Pressure (bar)
LKH Ultra Pure-10 40 35 6
LKH Ultra Pure-20 60 38 6
LKH Ultra Pure-25 90 55 6
LKH Ultra Pure-35 54 69 6
LKH Ultra Pure-40 90 79 6

  • Solid C

Applications

The Solid C pump is designed for standard duty applications, like pumping CIP (Cleaning In Place) solutions, utilities, water (processing, heating, cooling), washing machines, simple transport duty within working range. SolidC is suited for use in the food, dairy, beverage, personal care, pharmaceutical, light chemical and water industries.

 

Standard design

The SolidC pump consists of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seal. The SolidC pump is designed for CIP with emphasis on large internal roundings and cleanable seals. SolidC has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable legs.

 

Shaft seals

The SolidC pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal.

 

Materials

Product wetted steel parts: Acid-resistant steel 1.4404 (316L).

Other steel parts: Stainless steel 1.4301 (304).

Finish: Blasted (standard)3A polishing (Ra 0.8).

Product wetted seals: EPDM rubber (acc. to FDA).


 

SOLID C (Information provided based on 50 Hz motor frequency)

Model Max Flow (m3/hr) Max Head (mtrs) Max Inlet Pressure (bar)
SOLID C-1 36 28 4
SOLID C-2 70 45 4
SOLID C-3 84 66 4
SOLID C-3 55 85 4

SOLID C (Information provided based on 60 Hz motor frequency)

Model Max Flow (m3/hr) Max Head (mtrs) Max Inlet Pressure (bar)
SOLID C-1 40 40 4
SOLID C-2 81 64 4
SOLID C-3 82 92 4
SOLID C-4 543 86 4